Fixed Speeding Enforcement

SWHV-VCSE-900(P)


The Fixed Speed Measurement Enforcement System mainly comprises an 8-megapixel HD lens, 3D multi-target radar, a high-performance AI processor chip, auxiliary infrared light, and other modules. It can realize Real-time vehicle speed measurement, HD image acquisition, Vehicle information recognition, GPS/ Beidou dual-mode positioning, and Data upload.

  • High Resolution

  • High Accuracy of  Speed Measurement

  • Stable and Reliable

Application Scenarios

  • Speeding Capture

  • Traffic Data Acquisition

  • Blacklist Alarm

  • Real-time Traffic Monitoring


Function

◉ Vehicle Detection

The device has real-time video stream detection to track and capture vehicles, and the maximum detection range can cover four lanes.

◉ Multiple Target Speed Measurement

The device uses 3D radar to simultaneously detect the speed of multiple vehicles in multiple lanes, achieve accurate capture, and reduce missed shot.

◉ Speed Limit by Vehicle Classification

The device can automatically detect the vehicle type and set different speed limit values for large or small cars to reduce the workload of manual screening.

◉License Plate Recognition

The device uses the real-time video stream to recognize the license plate, which can automatically adapt to the front scene or rear scene detection and recognition.

◉ Character Overlay

The device allows overlaying time, license plate number, speed, custom characters, and other information on the image.

◉ Image Return

The captured vehicle information can be automatically transmitted back to the center.

Features

◉ High Resolution

The device uses a 4096×2208 high-resolution Ultra High Definition(UHD) image sensor, which can clearly recognize vehicle features.

◉ High Accuracy of Speed Measurement

The error is less than 1Kmph when 100Kmph is below and less than 1% when 100Kmph is above to reduce the disputes caused by inaccurate speed measurement.

◉ Stable and Reliable

The device adopts an All-in-One, wide-temperature design, which is stable and reliable and can adapt to various outdoor environments.

◉ Easy Installation

The whole system only needs to install one device, and the construction installation does not damage the road surface.

Specification

Sensor Type 8 MP 1/1.2" CMOS
Effective Pixels 4096×2208
Shutter Auto/Manual,14.8µs~40ms
Min. Illumination Color 0.0037Lux@(F1.4,AGC ON)
Lens Type Fixed-focal,35 mm
Video Compression H264 AVC / H265 HEVC
Video Bit Rate 2kbps ~ 16384kbps
Video Frame Rate 1fps ~ 25fps
Resolution H.264 1080P(1920×1080)
Image Settings Automatic adjustment of Exposure Time, Exposure Control, Gain, and White Balance
Video Stream H.264:1080P,720P(default)
Number Of Covered Lanes 4 lanes
Number Plate Recognition Accuracy ≥95%(Standard license plate)
Storage 256G SSD
Classified Speed Limit Support vehicle classification speed limit
Output Contents 2 large images of the vehicle, 2 Close-up images of the vehicle, 1 Small image of the plate, additional information text, etc
GPS Timing Yes
Wifi Connection Debugging Yes
LED Light Yes(IR)
Frequency Band 24.0~24.25GHz
Speed Range 5 KM/h -300 KM/h
Radiant Power 100mW(20dBm)
Error Range ±1km/h(5-100 KM/h), ±1%(100-300 KM/h)
Power Supply AC 100~240V,50~60Hz
Power Consumption ≤ 150 W(Heater ON≤ 450 W)
Network Protocol Supports multiple network protocols, including TCP/IP, HTTP, NTP, and RTSP,Onvif, etc.
Network Port 1 100/1000M self-adaptive RJ45
Environment Temperature -30℃ ~ +60℃, Humidity 20% ~ 90% (no condensation)
Protection Grade IP65
Vehicle Color Recognition Yes
Vehicle Brand Recognition Yes
Vehicle Model Recognition Yes